Kobolds | Lizard Gremlin Miniatures | 3D Resin Print
Kobolds | Lizard Gremlin Miniatures | 3D Resin Print
While the Mites were annoying, the villagers knew not to mess with the local gang of Kobolds infesting the nearby hills. Led by a vicious War Chief, these walking lizards were skilled in ranged and melee combat, and could dispatch a small force of men without much trouble.
The townsfolk knew they'd need something more impressive than a solitary Iron Golem if they were going to rid their lands of this scourge for good...
Details
Title: Kobolds
Artist: Demon Door Miniatures
Collection: Lizard Warriors
Scale: 32mm / 75mm / 150mm, custom
Size: varies, see dimensions below
Weight: varies
Pieces: varies
Printing Method: SLA
Material: UV resin
Color: Gray
Base Included: Yes
Assembly Required: Yes
Sizing
These miniatures come with the following approximate dimensions:
Ranged #1 - 32mm / 75mm / 150mm (2 pieces):
- 35mm / 85mm / 165mm wide
- 45mm / 105mm / 210mm deep
- 50mm / 115mm / 230mm tall
- Base: 32mm / 75mm / 165mm diameter
Ranged #2 - 32mm / 75mm / 150mm (2 pieces):
- 40mm / 95mm / 190mm wide
- 45mm / 100mm / 200mm deep
- 45mm / 110mm / 215mm tall
- Base: 32mm / 75mm / 165mm diameter
Ranged #3 - 32mm / 75mm / 150mm (2 pieces):
- 35mm / 85mm / 170mm wide
- 40mm / 95mm / 190mm deep
- 45mm / 100mm / 200mm tall
- Base: 32mm / 75mm / 165mm diameter
Spear #1 - 32mm / 75mm / 150mm (2 pieces):
- 35mm / 85mm / 165mm wide
- 35mm / 85mm / 165mm deep
- 70mm / 160mm / 325mm tall
- Base: 32mm / 75mm / 165mm diameter
Spear #2 - 32mm / 75mm / 150mm (2 pieces):
- 35mm / 85mm / 175mm wide
- 65mm / 150mm / 305mm deep
- 40mm / 100mm / 195mm tall
- Base: 32mm / 75mm / 165mm diameter
Spear #3 - 32mm / 75mm / 150mm (2 pieces):
- 35mm / 85mm / 165mm wide
- 65mm / 155mm / 310mm deep
- 40mm / 90mm / 185mm tall
- Base: 32mm / 75mm / 165mm diameter
Skirmisher #1 - 32mm / 75mm / 150mm (2 pieces):
- 60mm / 140mm / 285mm wide
- 35mm / 85mm / 175mm deep
- 55mm / 125mm / 250mm tall
- Base: 32mm / 75mm / 165mm diameter
Skirmisher #2 - 32mm / 75mm / 150mm (2 pieces):
- 40mm / 90mm / 185mm wide
- 55mm / 125mm / 255mm deep
- 45mm / 100mm / 205mm tall
- Base: 32mm / 75mm / 165mm diameter
Skirmisher #3 - 32mm / 75mm / 150mm (2 pieces):
- 35mm / 85mm / 165mm wide
- 45mm / 105mm / 215mm deep
- 40mm / 100mm / 200mm tall
- Base: 32mm / 75mm / 165mm diameter
Heavy Kobold A - 32mm / 75mm / 150mm (2 pieces):
- 35mm / 90mm / 175mm wide
- 55mm / 125mm / 250mm deep
- 65mm / 145mm / 295mm tall
- Base: 32mm / 75mm diameter
Heavy Kobold B - 32mm / 75mm / 150mm (2 pieces):
- 40mm / 90mm / 180mm wide
- 50mm / 120mm / 240mm deep
- 60mm / 135mm / 275mm tall
- Base: 32mm / 75mm diameter
Heavy Kobold C - 32mm / 75mm /150mm (2 pieces):
- 55mm / 130mm / 260mm wide
- 70mm / 160mm / 325mm deep
- 65mm / 150mm / 295mm tall
- Base: 32mm / 75mm diameter
Heavy Kobold D - 32mm / 75mm / 150mm (2 pieces):
- 40mm / 90mm / 180mm wide
- 60mm / 140mm / 285mm deep
- 55mm / 130mm / 255mm tall
- Base: 32mm / 75mm diameter
War Chief - 75mm / 150mm (2 pieces):
- 90mm / 185mm wide
- 80mm / 160mm deep
- 110mm / 220mm tall
- Base: 68mm / 136mm diameter
Credit and References
This model is an official product of Demon Door Miniatures. Hamilton PrintWorks is an official licensed merchant of Demon Door Miniatures "Lizard Warriors" collection and has rights to sell physical prints of all collection models.
Check out Demon Door Miniatures for more awesome 3D designs!
Production Features
Production Features
Each miniature is printed in sturdy gray UV resin with a 0.05mm layer height and 6K+ resolution, resulting in highly detailed models with a smooth finish and nigh imperceptible layer lines. Each print is thoroughly washed in 99% IPA (isopropyl alcohol) and cured under UV light until fully dry, inside and out. Each model is supported, hollowed, and holed where appropriate to ensure efficient resin use, solid walls, and clean drainage of internal resin.
While all efforts will be taken to provide perfect prints, resin models always have minor blemishes, including support marks. Drainage and venting holes are placed in discrete locations on the bottom and back of the print but are left unfilled. Postprocessing will be applied to each print to remove supports and nits that may be left over from the printing process. Reprints will be done at no charge to you if a specific part is unsalvageable.
Each miniature is sold unpainted; any product photos showing painted or decorated work are for illustrative purposes only.
Materials & Care
Materials & Care
This 3D printed piece is made from UV resin. Resin prints are not safe for young children and should only be handled by ages 16+. Liquid resin is toxic so while the cured resin in this print is safe to handle, it should never be exposed to solvents or consumed by any animal. Do not leave it in direct sunlight or use it in environments over 50°C.
Shipping & Packaging
Shipping & Packaging
This miniature is composed of separate pieces and are packaged individually, allowing for ease of use when painting and decorating each part. It is left to the customer to glue/mount the miniature, in addition to other finishing work like minor sanding and/or filling of drain holes or support marks.
Each piece will be bagged and wrapped carefully in bubble-wrap to ensure a safe and secure shipping process.
Share
