Lighthouse | Beacon Tower | Miniature Gaming Terrain Kit | GameScape3D | Sea Stack Cove

Orders require approximately 1-3 weeks of production and processing time before shipping. You will be kept up-to-date on the status of your order via e-mail as it is printed. Progress photos are available upon request.

This miniature terrain kit comes unassembled and unpainted. Assembly requires glue or adhesive tack.

Free shipping in the domestic USA is provided for orders over $35.

Build out the scenery of your seaside port, desolate coastline, or ocean hideaway with this epic miniature terrain kit: the Lighthouse! This terrain kit is perfect for dozens of fun and challenging scenarios for your party. Defend against a crew of marauding pirates, storm the keep to save the local port, or light the beacon to warn off the incoming merchant fleet.

This terrain set has a bunch of fun features, including: a removable cabin door, multiple floors connected via hatchways and ladders, rugged battlements for the watch crew, a removable and hollow fire piece that can be lit using LED lights, and storage in the base for all of the smaller terrain kit pieces.

Stacked and secured using a peg and cone system, this beacon tower is perfect for table top RPG play, dioramas, art displays, or for your own personal collection. Part of the Sea Stack Cove terrain series from GameScape3D, this piece pairs well in style and size with many of the other items from that set. If you're a fan of coastal fortifications and derelict structures, then this terrain kit is for you.

Sizing

This terrain kit comes in one standard size with the following approximate dimensions:

• Height - 410mm, from bottommost rock to the top of the lighthouse
• Width - 230mm, rock edge to rock edge
• Depth - 185mm, rock edge to rock edge

This model is printed in multiple parts and altogether weighs approximately 1.2kg.

While there is no official scale rating for the Sea Stack Cove terrain series, the terrain is approximately sized for 28/32mm (1:56) scale figures, though this can vary across the terrain series.

Custom resizing is available for this terrain kit, though we will need to coordinate with you on the specifics of your order. Custom resizing of existing designs do require quite a bit of hands-on work, adding/editing supports and conducting test prints to get you the best print possible. As a result, pricing will be done on a case-by-case basis. Quotes available upon request.

If you are interested in a custom size for this terrain kit, please contact us at: projects at hpw3d dot com

Parts and Assembly

The parts list you will receive with this terrain kit includes:

• Base (1)
• Battlement floor (1)
• Beacon floor (1)
• Beacon top (1)
• Cabin back wall, lower (1)
• Cabin back wall, upper (1)
• Cabin ceiling (1)
• Cabin door (1)
• Cabin floor (1)
• Cabin roof (1)
• Fire piece (1)
• Hatch, closed (4)
• Hatch, open (4)
• Ladder (4)
• Stacking pegs (17)
• Stone floor (1)
• Stone floor, wall (1)
• Wooden floor (1)
• Wooden floor, wall (1)

The Lighthouse uses a peg-and-cone system to interlock each layer. Use adhesive tack or poster putty to augment the existing supports for a non-permanent build. You can use modeling glue for a more permanent build, though this is not recommended.

Production

All of the rock, fort, and cabin pieces are printed in gray PLA filament with a 0.15mm layer height, resulting in highly detailed models with nigh imperceptible layer lines. Other filament colors may be considered depending on inventory and availability.

The hatches, ladders, cabin door, and fire piece are printed in sturdy gray UV resin with a 0.05mm layer height and 6K resolution, also resulting in models with superb detail, a smooth finish, and almost invisible layer lines. Each resin print is thoroughly washed in 99% IPA (isopropyl alcohol) and cured under UV light until fully dry, inside and out. Each model is supported, hollowed, and holed where appropriate to ensure efficient resin use, solid walls, and clean drainage of internal resin.

While all efforts will be taken to provide perfect prints, filament and resin models can have minor blemishes, including support marks. Postprocessing will be applied to each part to remove any stringing or major blemishes that may be left over from the printing process. Reprints will be done at no charge to you if a specific part is unsalvageable.

Each print is sold unpainted; any product photos showing painted or decorated work are for illustrative purposes only.

Packaging and Shipping

Each part of the kit will be bagged and wrapped carefully in bubble-wrap to ensure a safe and secure shipping process. Following our standard HPW shipping policy, all orders in the domestic USA over $35 come with free shipping.

This terrain kit takes approximately 170 hours to print, including handling time to clean and package the parts. As each terrain kit is created on demand, please allow 1-3 weeks for production and shipping. We will strive to get your order in your hands as soon as possible!

Credit and References

This model is an official product of the GameScape3D "Sea Stack Cove" collection. Hamilton PrintWorks is an official licensed merchant of the GameScape3D "Sea Stack Cove" campaign and has rights to sell physical prints of all campaign models.

Check out GameScape3D for more awesome 3D designs: gamescape3d dot com