Mites | Tiny Goblin Miniatures | 3D Resin Print
Mites | Tiny Goblin Miniatures | 3D Resin Print
Nothing plagued the countryside more than the Mites, a rambunctious crew of tiny Goblins armed to the teeth with slingshots and makeshift wooden spears. It wasn't that they were dangerous per se...they were just so incredibly annoying. Raiding gardens, tearing down fencing and road signs, setting small fires to every pile of dry brush they could find. Raiding attempts to drive them off never worked, and so the Mites remained, a trial of patience and mercy on any who came across them.
Details
Title: Mites
Artist: Demon Door Miniatures
Collection: Lizard Warriors
Scale: 25mm / 50mm / 100mm, custom
Size: varies, see dimensions below
Weight: varies
Pieces: varies
Printing Method: SLA
Material: UV resin
Color: Gray
Base Included: Yes
Assembly Required: Yes
Sizing
These miniatures come with the following approximate dimensions:
Mite #1 - 25mm / 50mm / 100mm
- 35mm / 65mm / 130mm wide
- 35mm / 70mm / 140mm deep
- 50mm / 95mm / 195mm tall
- Base: 33mm / 66mm / 132mm diameter
Mite #2 - 25mm / 50mm / 100mm
- 35mm / 65mm / 130mm wide
- 40mm / 75mm / 150mm deep
- 40mm / 85mm / 170mm tall
- Base: 33mm / 66mm / 132mm diameter
Mite #3 - 25mm / 50mm / 100mm
- 35mm / 75mm / 145mm wide
- 35mm / 70mm / 140mm deep
- 35mm / 75mm / 150mm tall
- Base: 33mm / 66mm / 132mm diameter
Mite #4 - 25mm / 50mm / 100mm
- 30mm / 65mm / 130mm wide
- 35mm / 75mm / 150mm deep
- 30mm / 65mm / 130mm tall
- Base: 33mm / 66mm / 132mm diameter
Mite #5 - 25mm / 50mm / 100mm
- 30mm / 65mm / 130mm wide
- 35mm / 70mm / 135mm deep
- 40mm / 85mm / 170mm tall
- Base: 33mm / 66mm / 132mm diameter
Mite #6 - 25mm / 50mm / 100mm
- 35mm / 65mm / 130mm wide
- 35mm / 65mm / 130mm deep
- 35mm / 70mm / 145mm tall
- Base: 33mm / 66mm / 132mm diameter
Mite #7 - 25mm / 50mm / 100mm
- 35mm / 65mm / 130mm wide
- 40mm / 80mm / 155mm deep
- 30mm / 65mm / 130mm tall
- Base: 33mm / 66mm / 132mm diameter
Mite #8 - 25mm / 50mm / 100mm
- 30mm / 65mm / 130mm wide
- 35mm / 65mm / 130mm deep
- 30mm / 65mm / 130mm tall
- Base: 33mm / 66mm / 132mm diameter
Mite #9 - 25mm / 50mm / 100mm
- 35mm / 75mm / 145mm wide
- 35mm / 70mm / 145mm deep
- 35mm / 65mm / 135mm tall
- Base: 33mm / 66mm / 132mm diameter
Mite #10 - 25mm / 50mm / 100mm
- 35mm / 65mm / 135mm wide
- 35mm / 70mm / 140mm deep
- 35mm / 65mm / 135mm tall
- Base: 33mm / 66mm / 132mm diameter
Credit and References
This model is an official product of Demon Door Miniatures. Hamilton PrintWorks is an official licensed merchant of Demon Door Miniatures "Lizard Warriors" collection and has rights to sell physical prints of all collection models.
Check out Demon Door Miniatures for more awesome 3D designs!
Production Features
Production Features
Each miniature is printed in sturdy gray UV resin with a 0.05mm layer height and 6K+ resolution, resulting in highly detailed models with a smooth finish and nigh imperceptible layer lines. Each print is thoroughly washed in 99% IPA (isopropyl alcohol) and cured under UV light until fully dry, inside and out. Each model is supported, hollowed, and holed where appropriate to ensure efficient resin use, solid walls, and clean drainage of internal resin.
While all efforts will be taken to provide perfect prints, resin models always have minor blemishes, including support marks. Drainage and venting holes are placed in discrete locations on the bottom and back of the print but are left unfilled. Postprocessing will be applied to each print to remove supports and nits that may be left over from the printing process. Reprints will be done at no charge to you if a specific part is unsalvageable.
Each miniature is sold unpainted; any product photos showing painted or decorated work are for illustrative purposes only.
Materials & Care
Materials & Care
This 3D printed piece is made from UV resin. Resin prints are not safe for young children and should only be handled by ages 16+. Liquid resin is toxic so while the cured resin in this print is safe to handle, it should never be exposed to solvents or consumed by any animal. Do not leave it in direct sunlight or use it in environments over 50°C.
Shipping & Packaging
Shipping & Packaging
This miniature is composed of separate pieces and are packaged individually, allowing for ease of use when painting and decorating each part. It is left to the customer to glue/mount the miniature, in addition to other finishing work like minor sanding and/or filling of drain holes or support marks.
Each piece will be bagged and wrapped carefully in bubble-wrap to ensure a safe and secure shipping process.
Share
