Prism Head | Nightmare Enforcer Miniatures | 3D Resin Print
Prism Head | Nightmare Enforcer Miniatures | 3D Resin Print
Your rage and your fear pushes you forwards. The swings of your blade becoming more brutal with each second. You ascend the tower knowing on some level the answers lay at the top. The last impediment a heavy steel door falls to a brutal shoulder charge.
Inside at the top of the tower stands a true monster. Topless and covered in scars, its lower half covered in patchwork leather. In its hand it drags a brutal long sword, though in reality it's little more than a hulking mass of iron.
But far worse is the head. A container it looks like for within its form is pulsating flesh it squirms and drips. Somehow the creature speaks clearly. 'Welcome home Judge.'
You fight on instinct, brutal strike for brutal strike, your armour wrecked falls away. With growing horror, you realise those potions you took earlier have effected you in unknown ways, as your skin begins to match your assailant. The fight lasts for ... days? Weeks? Hours? You're not sure. Eventually the creature bests you, pushing you to the wall. You look to your side, catching a glimpse of your reflection in a mirror... and you realise with that there is no one else with you in the room. The creature disappears in an instant, leaving you alone. The bell begins to toll from above you.
Memories flash back of your previous life as the judge. The innocence discarded, the cruel allowed free, the blood on your hands. These are the last thoughts in your head before the metal cage closes around your skull with a final clang.
Details
Title: Prism Head
Artist: Printed Obsession
Collection: The Quiet Mountain
Scale: 32/75/150mm, custom
Size: varies, see dimensions below
Weight: varies
Pieces: varies
Printing Method: SLA
Material: UV resin
Color: Gray
Base Included: No
Assembly Required: Yes
Sizing
This miniature and bust come with the following approximate dimensions:
Prism Head #1 - 32mm / 75mm / 150mm (1 piece):
- 35mm / 85mm / 165mm wide
- 60mm / 145mm / 275mm deep
- 55mm / 125mm / 240mm tall
Prism Head #2 - 32mm / 75mm / 150mm (1 piece):
- 35mm / 85mm / 165mm wide
- 60mm / 145mm / 275mm deep
- 55mm / 130mm / 250mm tall
Credit and References
This model is an official product of Printed Obsession. Hamilton PrintWorks is an official licensed merchant of Printed Obsession and has rights to sell physical prints of all Printed Obsession models.
Check out Printed Obsession on MyMiniFactory for more awesome 3D designs!
Production Features
Production Features
Each miniature is printed in sturdy gray UV resin with a 0.05mm layer height and 6K+ resolution, resulting in highly detailed models with a smooth finish and nigh imperceptible layer lines. Each print is thoroughly washed in 99% IPA (isopropyl alcohol) and cured under UV light until fully dry, inside and out. Each model is supported, hollowed, and holed where appropriate to ensure efficient resin use, solid walls, and clean drainage of internal resin.
While all efforts will be taken to provide perfect prints, resin models always have minor blemishes, including support marks. Drainage and venting holes are placed in discrete locations on the bottom and back of the print but are left unfilled. Postprocessing will be applied to each print to remove supports and nits that may be left over from the printing process. Reprints will be done at no charge to you if a specific part is unsalvageable.
Each miniature is sold unpainted; any product photos showing painted or decorated work are for illustrative purposes only.
Materials & Care
Materials & Care
This 3D printed piece is made from UV resin. Resin prints are not safe for young children and should only be handled by ages 16+. Liquid resin is toxic so while the cured resin in this print is safe to handle, it should never be exposed to solvents or consumed by any animal. Do not leave it in direct sunlight or use it in environments over 50°C.
Shipping & Packaging
Shipping & Packaging
This miniature is composed of separate pieces and are packaged individually, allowing for ease of use when painting and decorating each part. It is left to the customer to glue/mount the miniature, in addition to other finishing work like minor sanding and/or filling of drain holes or support marks.
Each piece will be bagged and wrapped carefully in bubble-wrap to ensure a safe and secure shipping process.
Share
